Fuel System Cleaner Worth it? (Injector Cleaner Guide)

How many times have your mechanic recommended you fuel injector cleaner? I bet this happens a lot and you might wonder if fuel system cleaners are ‘snake oil’. Does injector cleaner really work? Today we find try to find out.

does injector cleaner really work

What does Fuel Injector cleaner do?

Injector cleaners are basically solvents that help clean out the fuel pathways. These bottles of fuel system cleaners are poured into the fuel tank. They start working to clean the entire fuel system by dissolving the gum and other residue collected in the fuel lines.

Fuel injector cleaners are combustible solvents, therefore they are burnt off in the engine while it’s running.

Three of the most common ingredients in the fuel injector cleaner are polyether amine, polyisobutylene, and polyisobutylene amine. Let’s understand why they are added.

Polyether Amine: Polyether amine is used for both petrol and diesel applications. It is said to reduce misfiring and knocking from the engine. It’s also effective in removing excess moisture from the fuel line. This chemical really helps when there is old gas in the fuel tank that’s just blocking the fuel line and not burning.

Polyisobutylene: Like the Polyether amine, the Polyisobutylene also has the similar cleaning qualities. In fact both on them are quite close in chemical composition. Most injecter cleaner companies label it as ‘PIB’ on their products.

Polyether amine (PEA): PEA is added to the injector cleaners so that it can dissolve solid deposits in the fuel lines. Solid deposits can clog up the fuel system and this reduced the drivability of the car. Reduced fuel delivery could also increase the chances on knocking. This is a much stronger chemical than the previous two, therefore adding too much of it can cause problems too.

Does Injector Cleaner really work?

While fuel injector cleaners have been in the market since decades, we couldn’t find any published study by a scientific research institute. However, it’s safe to say that fuel system cleaner do actually work. But, only if used correctly.

If the deposit buildup is too much then sure, regular pour-in injector cleaner solvents won’t be effective. That’s because there are many laws and regulations that don’t allow companies to retail harsh chemicals openly.

In case of severe depositing and injector clogging, injector cleaning machine is most effective. This requires injectors to be removed from the car and cleaned using pressurised cleaning chemical. This machine is used to clean severe clogging of injectors (video):

Problems solved by fuel injector cleaner?

Carbon collecting at the intake valves

Fuel companies say that they already add additives that prevent carbon buildup. But the truth is that carbon buildup is a real problem that requires using fuel injector cleaners.

The back of the intake valve can collect a layer of carbon. This can reduce the velocity of fuel mixture and also prevent the valve to seal properly.

Apart from this, there are other areas that are prone to carbon buildup as well. This includes piston head, intake manifold and cylinder head. Fuel injector cleaner is the best solution to clean this carbon deposit. You can expect to see better running engine after using injector cleaner.

However, excess carbon buildup on the valves can only be cleaned by opening up the engine. If you are having a hesitant engine, then it’s worth trying out a good injector cleaner.

Reduced acceleration and fuel efficiency

The modern fuel injectors run on close tolerances through which pressurized fuel is pushed. For the proper functioning, the injectors need to deliver atomized mist of fuel when asked for. The clogging of the fine channels inside the injectors can disrupt its functioning.
When the spray pattern and pressure is not what is required, the car might start running rough. This also reduced fuel efficiency as the fuel droplets in the mist is not properly atomized. Fuel injector cleaner works well to solve this issue.

how to use fuel injector cleaner in the gas tank

There are so many fuel injectors in the market today that it’s always recommended to read the directions first. If the concentration of fuel injector is too high, then it can also cause some damage.

Generally, a full bottle of fuel injector is good for about 50-litre of fuel. Your car’s fuel tank capacity can range between 35 to 70 litres.

So how should you use it? It’s best to use fuel injector cleaner right before topping up your fuel tank. On your next visit to gas station, pour the injector cleaner first and then top up with fuel. This will allow the injector cleaner to mix properly with the fuel. Remember: Let the fuel tank get near empty before filling up again (Don’t dilute the mixture).

That’s it. Your first cycle of injector cleaning will be complete after burning off this fuel mixture. Most of the time this is enough to notice some performance improvements but you can go another cycle if you’re not satisfied.

fuel system cleaner worth it

How often should you use it

It’s often recommended to use a fuel injector cleaner every 10,000 km. However, if you suspect that the fuel quality in your area is not great then every 5,000 km will be a good choice.

But again, with so many injector cleaners with varying strengths, it’s best to refer to what the product manufacturer suggests.

Best Fuel Injector Cleaners for petrol car

If you are confused about what’s the right fuel system cleaner for your car then here are our favourite products:

Liqui Moly Petrol Injector Cleaner

This injector cleaner is compatible for all gasoline engines. Liqui moly injector cleaner has been tested to be safe for catalytic converters and turbochargers. This 300ml bottle is good for 70-litre of gas tank.

Here’s what the manufacturer claims: “Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running. Cares for all components in the gasoline injection system. Protects the entire fuel system from corrosion. Improves the throttle response and compression. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.” Check price on Amazon- here

STP Super Concentrated Injector Cleaners

Manufacturer says: “STP Super Concentrated Fuel Injector Cleaner contains concentrated detergents that help dissolve and remove harmful carbon, gum, and varnish deposits on fuel injectors. Without cleaning, deposits can lead to hard starts, lost acceleration and rough idling. This product is made with jet fuel, a high-quality carrier of active ingredients.”

It comes in 354ml bottle that’s good for 65 litres of fuel. Check price on Amazon- here

Fuel Injector Cleaner for Diesel Car

Liqui Moly Super Diesel Additive

Manufacturer says: “It reduces wear of fuel pump, extends life of the equipment. Improves engine performance and emissions control. Prevents rust and contamination in fuel tank, pipes and injection system. Improves the economy.”

This product is tested to be safe to turbo cars. One bottle is sufficient for 75-litre of fuel. Check price on Amazon- here

Abro DI-502 Diesel Injector Cleaner

This product claims to stops Diesel Engine Hesitation, helps Remove Water from Diesel Fuel Tank, and Improve Mileage by dissolves gum and deposits. Check its price on Amazon- Here

I hope now you have your questions regarding injector cleaners answered. If you have any other question, let us know in the comments section.

Watch this video to learn more about fuel injector cleaners and other additives:

Also Know: How to take care of your turbocharged car

Siddharth Sharma

Siddharth has always been passionate about Cars and Bikes. He was the kind of kid that always had the latest Auto magazine in his school bag. He had this dream- to become a professional racecar driver. Finally, in 2012 he found himself racing as a rookie driver in the Polo R Cup national racing championship. Over time he had to readjust the sail and get into automotive journalism to continue enjoying machines on wheels.

Latest posts by Siddharth Sharma (see all)

Siddharth Sharma

Siddharth has always been passionate about Cars and Bikes. He was the kind of kid that always had the latest Auto magazine in his school bag. He had this dream- to become a professional racecar driver. Finally, in 2012 he found himself racing as a rookie driver in the Polo R Cup national racing championship. Over time he had to readjust the sail and get into automotive journalism to continue enjoying machines on wheels.